Flashings are used wherever something intersects the roof. These are the most important areas of your roof. Various materials can be used to protect these areas: sheet metal (copper, galvanized steel, aluminum), Lead, ice and water shield, membranes, and sealants can be integrated at siding, chimneys, walls, gutter lines, skylights, pipes, and vents. If the existing flashing is in good shape they can sometimes be re-used. However, since flashing can be the most critical roof component we recommend new flashings if there is any concern about the existing.

For residential roofs, typically, one or two days (of course, if your roof is very large – or if substantial repairs are required – it could take a bit longer). The weather can also delay the process, but we will always ensure the roof is water tight from beginning to end.

Typically, the removal and replacement of gutters will allow the installation of ice and water shield onto fascia boards which would seal the outside edge from water infiltration in ice damming conditions. We can replace gutters with or without a new roof. We install copper, galvanized steel and aluminum gutters. Our roofing professionals will be able to determine this for you, and explain the benefits of replacing your roof and gutters together.

Sometimes we can, depending on your roof and what’s up there. Most re-roofs should be evaluated on a case by case basis. Generally speaking, tearing off existing materials, inspecting the decking (as well as the general integrity of your roof structure) and then installing your new roof will guarantee optimum long-term performance.

Ice and Water Shield is a protective underlayment that is put on over the wood deck prior to any shingles. Ice and Water Shield helps prevent water infiltration during ice damming situations. We typically install Ice and Water Shield along the eaves, around chimneys, skylights and in all valleys.

We’ll rake and sweep all debris from the roof and around the house (sidewalks, driveways, etc.). Then we’ll use nail magnets to find and pick up nails. We will perform a final inspection of your new roof and your grounds to assure your complete satisfaction

For a new skylight installation there’s no better time to have the work done than when you’re replacing the roof on your house. If you have skylights that leak or give you other problems, we will come out and diagnose the problem to the best of our ability. In this day and age skylights on shingle roofs have become much more common, and affordable. If you would like to add a skylight let our estimators know and we will provide you with a variety of options.

We are fully insured for both workers’ comp and general liability coverage. What this means to you is that you will never be responsible for any of these expenses. We will provide certificates of insurance upon request.

SMART Roofing has completed over 10,000 projects in it history. We are happy to provide you with a list of references that will confirm that we do our work as promised. We stand by our work, and will provide knowledgeable, honest answers to your questions.

Surveys have shown that the number one criteria most people use to pick a roofing contractor is trust. The NRCA (national roofing contractors association) recommends that you look for a contractor who fits the following criteria.

Has a proven track record (check references, talk to your local building department, look at work they’ve done in your area). Is stable (How long have they been in business? Who owns the company? If you have an old phone book, check if they were in it). Provides expertise (Are installers experienced? Does the contractor provide training and oversight of work? Has the contractor achieved certifications from manufacturers?).

Provides an understandable contract (Don’t sign something you can’t understand. Make sure you understand what you are getting, what it will cost and when payments are due).